Idol Pipe offers drip irrigation systems for round and flat dripper with servo driven dripper insertion device for pipe OD ranging from 12 to 20mm at max output 300kg/hours and max line speed 150mpm. Idol Pipe is one of the leading Round Drip Irrigation System manufacturers.

Drip Irrigation Pipe Plant extruders are offered with directly coupled engines, manual or hydraulic screen changer, two stainless steel Vacuum sizing tanks, and a cooling system for precise water pressure, high corrosion resistance, and long useful life. The 3-axis mechanical adjustment system with lateral position control allows quick precise positioning. The double belt haul-off is provided for optimum pulling force and to prevent ovality in the pipe.

The drippers are fed by a centrifugal feeder onto a conveyor belt and are advanced via two Inserting Belts. The insertion mechanism is driven by the mechanism. The drippers are pushed through a cooled inserting device which is set inside the cross-head.

The device has two insertion modes, continuous Inserting and Intermittent Inserting. In continuous Inserting, the drippers are continuously moving; the Inserting Wheels rotational speed is dependent on the speed of the pipe and the desired spacing. In Intermittent Inserting, the drippers are embedded each in turn. The Inserting Belts insert one dripper and stop. The Intermittent Inserting can be utilized to produce coils with grouped drippers where the spacing dimension is changing.

A lightweight, mechanically controlled and pneumatic backed up artist assembly is given to keep up the pressure of the pipe between haul off unit and winder. The winder is furnished with a programmed length counter and spicing push button and capable to wind max coil dia of 750mm.